• Remove the key and tag from the board computer. You can find this in the glove compartment.

  • Disconnect the car and the cable from the charging station

  • Apply the foot brake.

  • Place the key in the ignition and start the car. The message Ready appears on the display.

  • Press the button on the front of the handbrake and push the brake down

  • Put the gear lever in position D and always keep the foot brake applied when using the gear lever.

The positions are:

P = parking

R = reverse

N = neutral / free

D = drive

B = driving with regenerative braking, the car brakes when you release the accelerator pedal

Did this answer your question?